Home | Introduction | Product | Company Honour  | Produce equipment | Technical Support | Production Performance 
 
   

GZS1-12 Type Indoor Metal-Clad Withdrawable Switchgear


I. Scope of Application
The GZS1-12 type indoor metal-clad withdrawable switchgear is a complete distribution equipment of three-phase AC 50Hz single bus bar and single bus bar sectioning system with rated voltage 12KV. It is mainly applicable for power distribution in power plants, medium and small generators, and for power receiving and distribution in electric system and industrial and mining enterprises. It may as well be used for controlling, protecting and monitoring the high voltage motor that starts frequently.

II. Operating Conditions
1. Ambient temperature upper limit and lower limit are respectively +40≧ and -25≧.
2. Altitude is not more than 1000m;
3. Relative humidity: daily average value: <95%; monthly average value: <90%;
4. Seismic intensity is not more than 8<;
5. Places where there are no fire hazard, dirt and explosion risk, chemical corrosion and violent vibration.


III. Acceptance Criteria
GB3906-91 A.C. Metal-Enclosed Switchgear for Rated Voltage of 3-35kv
IEC2981990A.C. Metal-Enclosed Switchgear and Control gear for Rated Voltages above 1 KV and up to and including 52KV


IV. Structural Features
1. The package assembly coupled with high strength bolts and multiple bending technology enables the cabinet to have a high mechanical strength.
2. The advanced manufacturing process and application of imported numerically controlled shearing, punching and bending machine tools guarantee the accuracy of the dimensions of cabinet components. Thus, all the parts and assembly parts are interchangeable.
3. The cabinet is made of aluminum-zinc coated plate; the panel is subject to electrostatic spray. Thus, the cabinet has a beautiful appearance and shock resistance and as well a great antiseptic power.
4. The protection degree of crust of the switchgear is IP4X; the degree of protection of the compartment is IP2X.
5. Equipped with a mechanical interlocking device; having ^five-prevention ̄ capabilities.



IV. Structural Features
1. The package assembly coupled with high strength bolts and multiple bending technology enables the cabinet to have a high mechanical strength.
2. The advanced manufacturing process and application of imported numerically controlled shearing, punching and bending machine tools guarantee the accuracy of the dimensions of cabinet components. Thus, all the parts and assembly parts are interchangeable.
3. The cabinet is made of aluminum-zinc coated plate; the panel is subject to electrostatic spray. Thus, the cabinet has a beautiful appearance and shock resistance and as well a great antiseptic power.
4. The protection degree of crust of the switchgear is IP4X; the degree of protection of the compartment is IP2X.
5. Equipped with a mechanical interlocking device; having ^five-prevention ̄ capabilities.


V. Technical Data of Switch Cabinet

Item

Unit

Parameter

Rated voltage

KV

3  6  10

Maximum operating voltage

KV

3.6  7.2  12

Rated frequency

Hz

50


Rated insulation level

1min power frequency withstand voltage

KV

42

Lightning impulse withstand voltage

KV

75

Rated current

A

630 1000 1250 1600 2000 2500 3150

Rated breaking current

 

16 20 25 31.5 40 50

Rated making current (peak value)

 

40 50 63 80 100 125

3S short time withstand current (effective value)

KA

16 20 25 31.5 40 50

Rated dynamic current (peak value)

KA

40 50 63 80 100 125

Rated voltage of closing-opening device and ancillary circuit

V

DC 110 220
AC 110 220


VI. The purchaser should supply following information for ordering.
1. Main scheme number of primary circuit, single bus bar system diagram, array diagram and layout plan;
2. Electric schematic diagram of secondary circuit and terminal array diagram;
3. Types, specifications and quantity of electric components in the switch cabinet;
4. Material quality and specifications of main bus bar and branch bus bar;
5. Names and quantity of spare parts;
6. Please negotiate with the manufacturer on special requirements.
 
Coslight Group Harbin Switch Co., Ltd
Address: No. 68, Dianlan Street, Xuefu Road, Nangang District, Harbin City
Tel0451-86661821 / 86661386  Fax0451-86662333